Sympathy in Blue

Wow, it's Tuesday already!  Time seems to be flying by, although my son thinks time is really dragging (he's getting quite impatient for Halloween!).  For those of you affected by Hurricane Sandy, my thoughts and prayers continue to be with you.  Stay safe, friends!

When I discovered this week's challenge at Sunny Challenges & Creations, I was inspired to make a sympathy card.  I always find it hard to get motivated to make sympathy cards, but sadly, they are always needed and my supply has run quite low lately.  For this challenge, we were to make a sympathy card using this sketch:

I also incorporated the current Splitcoast Stampers Ways to Use It Challenge, which required us to use embossing on a card.  Here is my card:

 

I embossed a panel of Night of Navy card stock with a Texturz Plate in my Big Shot.  I inked the lower section of the panel with layers of Memento Tuxedo Black and Faded Jeans Distress inks, which created a subtly different shade for the lower half of the card.  I applied the ink one layer at a time, stopping between each layer to remove the excess ink by rubbing with a soft cloth (be sure to use an old cloth if you try this, as the ink will stain it).  Once I had the shade I wanted, I set it aside for a moment to dry.  I inked my sentiment stamp with layers of Night of Navy Classic and Faded Jeans Distress inks, then stamped it on a die cut label of white card stock.  I wrapped a piece of white grosgrain ribbon around the large panel, adhered the tag over the ribbon, and attached the entire panel to a white card base. 

 

While I will usually stamp "With Sympathy" or a similar sentiment on the front of the card and save the message stamp for the inside, I decided to do the reverse for this card.  I think the quote works well on the front for this one. 

 

Thanks for visiting!

 

Products Used:

 

Stamp: Close As A Memory (Stampin' Up!)

Paper: Whisper White and Night of Navy card stock (Stampin' Up!)

Ink: Memento Tuxedo Black (Tsukineko); Faded Jeans Distress Ink (Tim Holtz); Night of Navy Classic Ink (Stampin' Up!)

Tools: Big Shot (Sizzix); Texturz Plate (Stampin' Up!); Nestabilities Labels Eighteen (Spellbinders)

Accessories: White 1/4" Grosgain Ribbon (Stampin' Up!)

 

 

 

 

 

Coffee Break Friends

Happy Monday!  I hope you had an enjoyable weekend.  It was a busy and productive one at my house.  I always feel better about the upcoming week if I've managed to get a few things checked off my to-do list over the weekend.  It was also nice to just spend some time together as a family.  We ate lots of chili and carved a pumpkin and went to a Halloween party...the perfect way to spend a few chilly days in Autumn, if you ask me!

And while my family slept, I spent a few hours in my craft room to work on completing a few challenges.  The first card I made was for this week's CAS(E) This Sketch Challenge, which uses the following sketch:

 

I combined this sketch with the Operation Write Home Midweek Throwdown.  The current Midweek Throwdown challenge theme is "Celebrate Friendship", so I used both challenges to create this card:

 

 

This card combines two of my favorite themes: friendship and coffee! (Side note: I collect coffee stamps, so you'll see those quite often on my blog.  I also collect snowmen stamps, so I make a lot of winter cards!) 

 

Since this card will be donated to Operation Write Home, I wanted to keep the colors neutral enough that it could be sent or received by a man or a woman.  I made a card base from brown card stock and cut a panel of red card stock to run the length of the card. I stamped my coffee cup in Memento Espresso Truffle, then masked the cup to add the frothy milk. I applied Liquid Applique, then set the tag aside to dry. You're *supposed* to let the liquid applique dry overnight, but I never have that much patience!  After it seemed dry enough to me (an hour or two), I used my heat gun to make it puff up.  I love the texture it adds!  Because frothy milk isn't stark-white, I applied some metallic rub-ons with my fingers to change the color a bit.  Because I wanted the brown card stock to show through the vellum on my tag, I laid my tag on the back side of the red panel, traced around it and then cut out the area with my craft knife. I adhered the panel to my card base, then attached the tag to the card base using mini glue dots. I stamped my sentiment on white card stock in Memento Espresso Truffle and inked the edges of the white piece with the same color, then adhered it to the card. 

 

This old stamp set is just so much fun to use!  White Liquid Applique works perfectly for creating the frothy milk (which can also become a dollop of whipped cream for hot cocoa if you just change the sentiment). 

 

I noticed that in this photo, the red panel looks slightly skewed. It is perfectly straight on the card (I know this because I measured it...my darned astigmatism makes lining things up difficult so I rely on my trusty ruler!). I either need a better camera or I need to brush up on my photography skills!

 

Looking at this card today (when it's not the middle of the night!) I think I would like this a bit more if I had embossed the red panel to add a bit of texture.  I can definitely see several uses for the sketch and am looking forward to trying it with other images and sentiments.

 

I'll be back tomorrow to tackle another challenge or two.  I hope those of you who are hunkered down for Hurricane Sandy are staying safe and dry!  My thoughts and prayers are with all who are in the storm's path. 

 

Thanks for stopping by!

 

Products Used:

Ink: Memento Espresso Truffle (Tsukineko)

Stamps: Espress Yourself (Stampin' Up!)

Other: Liquid Applique (Marvy); Golden White Metallic Rub-On (Craf-T Products), heat tool, vellum tag

 

 

 

Once Upon A Time

No matter how many color combinations I explore, I often gravitate back to a couple.  One combo I use often is black, white and red.  I just love this color combination!  So here it is again, this time on a card for a challenge at a brand-new blog, 'ABC' Challenges 

Since this is their first challenge, they required us to use something new on our cards, whether it be something we actually purchased new or something that we just haven't used before.  Since I'm working on love-themed cards for Operation Write Home, I thought this would be the perfect time to try out a new die I purchased.  I bought it (along with several others) at a scrapbooking sale where crafters sell off supplies they are no longer using.  I came home with several dies this year, which was really exciting!  (I love getting a good deal almost as much as I love making cards!)  So the heart die cut on this card is my "new" for this challenge.  This ribbon might be a "new" also, because I don't recall ever using it before.  It was in my stash and who knows how long it's been there?!

Here's my card:

I really love this sentiment and the set that it comes from.  The stamp is definitely not new to me, as it's one of the stamps I used for my wedding.  This one always brings a smile to my face when I use it.

I started by stamping my background in craft ink on white card stock, then heat embossing it with clear embossing powder.  I wrapped my ribbon around the white panel, die cut my heart, stamped my sentiment and added some rhinestones to the heart.  I adhered the heart to the panel with dimensionals, then adhered the panel to a black card base.  I think this card would be appropriate as a general "I love you" card or as Valentine's Day card.

Here's a tip about dimensionals: For this card I used Stampin' Dimensionals (Stampin' Up!) to adhere the heart to the panel.  I love these dimensionals because they are only 1/16" thick.  I have purchased several other brands and many of those are 1/8" thick, which I feel is often too thick.  If you buy 1/16" thick dimensionals, you can always stack them to make them thicker if you want a different effect.  Stampin' Up! is not the only company who offers dimensionals in 1/16" thickness, so if you're shopping for another brand, just check the labels carefully.  You can also find tape that offers a dimensional effect, but again, check the thickness.  It's not such a big deal in cards that I'm hand-delivering, but when they go through the mail, that little bit of extra thickness is not always desireable. 

My craft room table is a bit of a disaster this week, so I'm planning to do some reorganizing before I do any more stamping.  I hope to have another card to post for you in the next couple of days.

Thanks for stopping by!

Products Used:

Background Stamp: Tres Chic (Stampin' Up!)

Background Ink: Craft Black (Stampin' Up!)

Sentiment Stamp: Fairy-Tale Wedding (Stampin' Up!)

Sentiment Ink: Memento Tuxedo Black (Tsukineko)

Die: Hearts, Tipsy (Sizzix)

Tools: Big Shot (Sizzix); Mrs. O'Leary's Clear Embossing Powder; rhinestones;
ribbon; Stampin' Dimensionals (Stampin' Up!)

 

 

Hearts Full of Love

Today's card is a CASE (Copy and Share Everything) card for the Featured Stamper Challenge at Splitcoast Stampers.  Every week a stamper is chosen to be the Featured Stamper, and the challenge participants choose one of his/her cards to CASE.  It is always inspiring to look through a Featured Stamper's gallery! 

Here is a link to the Featured Stamper's original card: Wish Big

And here is my card:

When you CASE a card for this challenge, you are asked to change at least two elements.  I chose to make several changes while still following the design of the card.  I used her layout almost identically and I matted the card front to a white base card, just as the original card maker did.  The original card had pink and blue and a "wish big" sentiment.  I wanted to make a love-themed card for Operation Write Home, so I used heart papers and a "love" sentiment.  I used a slightly different border die and a Nestabilities label for my sentiment.  The original card maker used a flourish of rhinestones and I just used a small row of them, as that's what I had on hand. 

I dry embossed the sentiment panel after cutting it with my Nestabilities.  I just love how a little detail like dry embossing can take a basic shape up a notch.  But no matter how hard I tried, I could not get those rhinestones to sparkle in my pictures!  You'll just have to trust me that they are clear rhinestones and they add just a touch of sparkle and shine to this card.

I always find it very challenging to mix patterned papers, but these hearts were similar enough that I thought they would work together and complement each other. It's fun to stretch outside of the box of my usual style and borrow someone else's ideas for a card!   

Thanks so much for stopping by!

Products Used:

 

Stamp: Hope Is... (Stampin' Up!)

Ink: Memento Espresso Truffle (Tsukineko)

Paper: Unknown

Tools: Big Shot (Sizzix); Nestabilities Labels Eighteen (Spellbinders);

Die-Namics Dainty Lace Border (My Favorite Things); rhinestones

To the Moon and Back

Today's card just tugs a bit at my heartstrings, so I hope you don't mind if I share the story behind this one.  I bought the stamp I used on this card because the sentiment means so much to me.  If you ask my son how much his mommy loves him, he'll answer, "To the moon and back!"  (I must pause here to announce that I have amazing children.  Sure, I'm biased, but it's still true!) 

So when I found this stamp recently, I knew it would be well-loved at my house.  And when I saw this week's challenge at CAS(E) This Sketch (check them out HERE), I decided it was the perfect time to pull out this stamp and start creating.  I have a feeling you'll be seeing more cards with this stamp in the future.  It's just such a great sentiment!

Here's the sketch I was working with:

And here is my card:

It's really hard to see in this picture (darned overcast day!), but the sentiment panel and the moon are shaded with peach, yellow and blue tones to give them some dimension and keep them from being stark white.  I used die cuts in my Big Shot for most of this card.  The moon is a circle die cut, the sentiment is a Nestabilities die cut, and the stars are die-cut from shimmery silver paper.  I stamped my sentiment, then sponged dye ink and chalks on my sentiment panel and the moon.  I adhered everything to a dark blue card base (it's lightly textured, which also doesn't show up well in the picture).  This will be an easy card to recreate, so I plan to make a few more to donate to Operation Write Home.  I am sure there are some deployed mommies and daddies who would love to send cards home to their kids!

I am working on another challenge card today and will be posting that one tomorrow.  Thanks for stopping by today!

Products Used:

 

Stamp - Unity

Paper - Various sources

Ink - Night of Navy Classic Ink (Stampin' Up!)

Tools: Big Shot; Sizzix Circles #2; Spellbinders Nestabilities Labels Eighteen;

Provo Craft die for stars; Stampin' Up! chalks; various dye inks

My First Midweek Throwdown Entry!

I completed my very first challenge for Operation Write Home!  I am so excited!!  I have started making cards to donate and decided using challenges will help me accomplish my goal faster.  I chose to do the Midweek Color Throwdown over on their blog, Stars and Stamps.  The challenge this week was to make a card using black and white with a "pop" of either red or green.  I was surprised at how difficult I found this challenge, considering that one of my favorite color combinations is black, white and red.  In fact, I've blogged about a couple of cards using these colors recently (HERE and HERE).  I'm going to blame my creative frustration on the fact that my baby is teething so I'm not sleeping much! 

I decided to make a "general" card, as our deployed servicemen and servicewomen can always use "any occasion" cards.  This stamp is from a set that really frustrates me because the font is intentionally messy. Whenever I use it I find myself trying to correct the ink mistakes, only to realize they are not mistakes, they're part of the design.  Being a bit of a perfectionist, this drives me batty! 

Here's my card:

See how it looks like my stamp skipped a bit or I wiggled it too much?  I promise that's how the stamp is designed!  I stamped the sentiment on white card stock, then die cut it using Nestabilities in my Big Shot.  I cut red and black card stocks with the same Nestabilities set, then layered the pieces.  I embossed the white card stock in my Big Shot, adhered the stamped piece to it, and tied some baker's twine around it.  I adhered the white panel to the black card base.  This is a quick Clean and Simple card, which seems to be my style this month.  This stamp set comes with four different sentiments, so I could easily make several different cards with this CAS layout. 

That's all for today!  We have a busy weekend ahead of us, but I hope to get some stamping time in to finish another project that's waiting on my desk. 

I hope you have a great weekend!  Thanks for stopping by!

 

Products Used:

 

Stamp: That's Nice (Stampin' Up!)

Ink: Memento Tuxedo Black
Paper: Various sources

Tools: Spellbinders Nestabilities Labels One; Divine Swirls Embossing Folder; twine

 

Acrylic Block Collage, Take 2

I just couldn't stop playing with this fun technique this week!  This is a continuation of the technique I posted yesterday.  If you missed it, HERE is yesterday's post.  You can also see the original challenge and technique instuctions on Splitcoast Stampers HERE.

This time I wanted to use softer, more subtle colors, so I decided to use purples and pinks.  My first card is a very Clean and Simple sympathy card:

The background was created by inking my acrylic block with several shades of pink and purple, then spritzing it with water and stamping it on the white card stock. After the background dried, I inked a small heart stamp and stamped it randomly over the background. Then I stamped my flowers and sentiment. Quick and easy!

I have mixed feelings about this next card.  I used the same basic background as the card above, but this time I inked stem images all over the area. I like the effect but feel it might just be a little too "busy" with all those stems! 

This technique just has so many possibilities.  I still want to make a card with separate color blocks, so I need to add that one to my list.  But I have a couple of other challenges waiting on my craft desk, so I am off to work on those now!

Thanks for stopping by!

Products Used:

 

Paper: Whisper White card stock (Stampin' Up!)

Inks on background: Various shades of pink and purple markers and dye ink pads

Inks on sentiment and flowers: Elegant Eggplant (Stampin' Up!)

Sentiment and flower stamps: "Close as a Memory" (Stampin' Up!)

Tools: Acrylic block, water mister